Home
/
Gemstones
/
Ruby: Red Corundum
Gemstones

Ruby: Red Corundum

With ruby, the red decides. Behind it lie questions of inclusions, treatment and origin that only a report can answer reliably.

Updated
2026-11-18T00:00:00.000Z
5
min read
Vikar Ahmed
Ruby: Red Corundum
Contents
In short

Ruby is the red variety of the mineral corundum. Its color comes from chromium. A pure, vivid red to slightly purplish red is valued most highly. Inclusions are the rule in ruby, and fine qualities over one carat are very rare. At 9 on the Mohs scale, it is one of the hardest colored stones and suits any jewelry.

At a glance

Mineral species
Corundum
Color
Red to slightly purplish red, colored by chromium
Mohs hardness
9
Key origins
Myanmar, Mozambique, Vietnam, Thailand, Madagascar, Tanzania
Treatments
Heating, also with flux, lead glass filling, diffusion
Laboratory report
Identity, type of treatment, origin on request
Distinction
Red corundum that is too light is considered pink sapphire

Red corundum, colored by chromium

Ruby and sapphire are varieties of the same mineral, corundum. It is called ruby when it is red. The color comes from the trace element chromium, and the more chromium, the stronger the red. Chromium can also trigger a red fluorescence that intensifies the color even in sunlight. Rubies from marble typically show this. In rubies from basalt, a higher iron content can mask this fluorescence. The best-known rubies come from marble deposits in Myanmar, the Himalayas and northern Vietnam.

Color is the most important value factor

No characteristic influences the value of a ruby as strongly as color. The finest stones show a pure, vivid red to slightly purplish red. Orange and purple secondary hues are valued lower. If the color is too dark, the stone loses its glow. If it is too light, it may be considered a pink sapphire. SSEF uses the trade name "Pigeon Blood Red" only for unmounted rubies with strong saturation that meet all of the laboratory's criteria.

Inclusions, cut and size

Rubies without inclusions practically do not exist. What matters is whether they reduce transparency and glow. Fine, crossing rutile needles, known as silk, can even help: they scatter light into facets that would otherwise remain dark. Intact silk also shows that a stone was not heated at very high temperatures. The crystal shape favors ovals and cushions. Because the rough is precious, many cutters cut for weight. Fine rubies over one carat are very rare, and the value per carat rises markedly with size.

Origins from Myanmar to Mozambique

Ruby mines today are located in Myanmar, Mozambique, Vietnam, Afghanistan, Madagascar, Tajikistan, Thailand, Tanzania and Kenya, among others. Myanmar, formerly Burma, has been documented as a ruby source since at least the year 600. Stones from one origin vary greatly in color and quality. New localities can yield rubies that closely resemble those of classic origins. A laboratory therefore determines the origin from microscopic features, trace elements and spectroscopic data. The entry origin report explains what such documentation provides.

Treatments: from heating to glass filling

With ruby, the range of treatments is wide. SSEF lists heating, heating with flux, heating with lead glass filling, fracture filling and diffusion. The differences are considerable. An untreated or only heated ruby is very durable. Lead glass-filled stones are on the market in large numbers, need more care and can be damaged even by mild acids such as lemon juice. At Vikar Ahmed, every treatment is disclosed openly, in the consultation and in writing on the certificate, the expert report and the invoice.

SSEF's report states "indications of heating" or "no indications of heating". The laboratory grades residues in healed fractures as minor, moderate or significant. At GIA, ruby is among the stones for which a report with geographic origin is offered. For colored gemstones, Vikar Ahmed works with Gübelin, SSEF, GRS and the DGemG, and for high-quality rubies from 1 carat a report with origin determination is standard with him. Comparing two rubies therefore always means comparing two reports as well. The basics are under treatment.

Hard and tough in jewelry

Corundum reaches 9 on the Mohs scale, is excellently tough and has no cleavage. A ruby is therefore suitable for rings worn daily, as well as for any other type of jewelry. Warm soapy water is always safe. Ultrasonic and steam are usually safe for untreated, heated and diffusion-treated stones. Stones with filled fractures or cavities and dyed stones are cleaned only with a damp cloth.

Frequently asked questions

Which engagement rings with ruby or sapphire are more robust?

Both are equally robust, because ruby and sapphire are the same mineral: corundum at 9 on the Mohs scale, with high toughness and no cleavage. Differences arise from treatment. A lead glass-filled ruby is considerably more delicate than an untreated or only heated stone. The statement on the laboratory report is what counts.

Rubellite or ruby for a ring with its own design?

For a ring worn daily, ruby is the more durable choice: 9 on the Mohs scale compared with 7 to 7.5 for rubellite, a red tourmaline. Rubellite, in turn, offers more leeway in size, because fine rubies over one carat are very rare. More about the stone under rubellite.

What distinguishes a ruby from a pink sapphire?

The strength of the color. Both are corundum. If the red is strong enough, the stone is called ruby. If it is too light, it may be considered a pink sapphire. There is no universally uniform boundary: in Sri Lanka, pink tones were traditionally counted as ruby.

What does "no indications of heating" mean on the report?

The wording means that the laboratory found no signs of heat treatment in its examination. It comes from SSEF reports. If the laboratory finds signs, the note reads "indications of heating". With ruby, this line is important because treatment changes how the stone is classified.

Private consultation

A ruby calls for looking at color, treatment and origin at the same time. If you are planning a piece of jewelry with ruby, you can submit your project to Vikar Ahmed in Idar-Oberstein. Design, visualization and execution take place there under one roof. Appointments are available by arrangement. Request a private consultation.

Further reading

Sources

  1. GIA: Ruby, Überblick, accessed 2026-11-16
  2. GIA: Ruby Description, accessed 2026-11-16
  3. GIA: Ruby Quality Factors, accessed 2026-11-16
  4. GIA: Ruby Care and Cleaning, accessed 2026-11-16
  5. GIA: Ruby History and Lore, accessed 2026-11-16
  6. SSEF: Ruby, accessed 2026-11-16
  7. GIA: Colored Stone Reports and Services, accessed 2026-11-16
  8. GIA: Tourmaline Care and Cleaning, accessed 2026-11-16
  9. Vikar Ahmed: Bespoke, Designprozess, accessed 2026-11-16
  10. Vikar Ahmed: Kontakt, accessed 2026-11-16
Hände eines Paares mit Diamantringen und goldener Uhr
Private consultation

A personal conversation starts here.

At the showroom in Idar-Oberstein or by video. Vikar Ahmed discusses your ideas, stones and designs with you and answers your questions calmly and in confidence.

Hauptstraße 111 · 55743 Idar-Oberstein, Germany