Home
/
Insights
/
Comparing Bespoke Quotes Fairly
Bespoke

Comparing Bespoke Quotes Fairly

Two quotes for the same one-of-a-kind piece can be far apart and still both be fair. They only become comparable when stone, metal, and work steps are described with equal precision.

Updated
2026-11-18T00:00:00.000Z
9
min read
Vikar Ahmed
Comparing Bespoke Quotes Fairly
Contents
In short

Bespoke quotes can only be compared fairly if both describe the same thing: the stone with laboratory report and treatment, the metal with its fineness, the number of design rounds, visualization, production, and dates. A price on request is customary for one-of-a-kind pieces, because the stone determines the value. A written cost range provides certainty if it states what can change it.

At a glance

Largest value factor
Usually the center stone
Price on request
Customary as long as stone and design are open
Cost range
A span, stating what can change it
Cost estimate
Under § 632 BGB, not payable in case of doubt
Substantial overrun
Duty to notify and right to terminate under § 649 BGB
Newly made piece
Contract for work and materials under § 650 BGB

Why bespoke quotes are hard to compare

With a series ring, you compare the same piece in two places. With a one-of-a-kind piece, you compare two proposals that differ in stone, design, and working method. The center stone is usually the largest factor. Two emeralds of the same weight can differ so much in color, transparency, and filling that their values have little in common.

Design sketch from the Vikar Ahmed atelier
As long as the design is open, quotes can only be compared roughly.

Then there is the effort you cannot see: conversations, sketches, design rounds, a three-dimensional model, setting by hand, polishing. A quote that does not name these steps may seem less expensive, but may well describe a different service. A comparison is therefore only fair once both quotes have been brought onto the same list of details. The framework for this is explained in the guide bespoke design.

Price on request, cost range, or fixed price

The three forms say something about the stage of the project, not about the integrity of the house. Price on request usually means that stone and design are still open. A cost range states a span for a described service. A fixed price requires that stone, metal, and design are settled. The further along the project is, the more precise the figure can be.

FormWhat it indicatesWhat to look for
Price on requestProject open, stone not yet chosenWhen and on what basis a figure will follow
Cost rangeSpan for a described serviceWhat shifts the span, such as the choice of stone
Cost estimateEstimate without guarantee of accuracyWhether it is charged itself, note on deviations
Fixed priceService fully describedWhat applies if the design is changed

The forms often merge during a project: from price on request to a range to a fixed price after the design is approved.

A price on request is therefore no warning sign for one-of-a-kind pieces. It only becomes critical if no written figure follows even after the stone has been chosen and the design approved. Conversely, a very early fixed price is only as reliable as the description behind it. How price and value in luxury jewelry can be assessed in principle is shown in the guide price and value in luxury jewelry.

What a complete quote contains

A complete quote describes the piece so precisely that a third party could understand it. For the stone, this means: species, weight, dimensions, cut, details on treatment and origin, and the laboratory that issued the report. For the metal: alloy and fineness in parts per thousand. For the work: design, visualization, production, and setting, each with what it includes.

  • Center stone: species, weight, cut, laboratory report with treatment and origin.
  • Accent stones: number, total weight, quality range.
  • Metal: alloy, fineness, platings such as rhodium.
  • Design: number of design rounds, type of visualization.
  • Production: dates, approvals, handling of changes.
  • Payment terms: deposit, installments, timing of the final payment.

With the metal, a close look pays off. Whether the setting is made of the same gold as the shank, whether white gold is rhodium-plated, and whether parts made of other metals are used affects value and care. What a clear statement on this contains is explained in the guide fineness in a one-of-a-kind piece. For the stone, the GIA report is a well-known example of an independent description.

Making the stones comparable

Two stones are only comparable if they are described by the same standards. CIBJO, the international jewelry confederation, publishes standards and terminology for diamonds, colored gemstones, pearls, and precious metals in its Blue Books. Their use is voluntary, but the confederation recommends them for all stages from rough stone to finished jewelry. More on this under CIBJO.

Design sketch from the Vikar Ahmed atelier
Quotes only become comparable when the stone is described the same way in both.

For colored gemstones, the laboratories' reports differ. The GIA identification report describes the material and lists detectable treatments, and for emerald, ruby, and sapphire also the origin on request. For emeralds, SSEF states the amount of filling in four levels. If you compare two quotes, you should make sure that both stones have a report of the same kind; otherwise you are comparing statements of differing precision.

Good to know

A stone without a statement on treatment is not automatically untreated. If the statement is missing, it is worth asking whether a report exists and what it says. With emeralds, filling with oil or resin is the rule, and the amount can range from insignificant to prominent.

Cost estimate and contract: what the law says

If a piece of jewelry is newly made, § 650 of the German Civil Code (BGB) provides that a contract for the delivery of movable goods yet to be produced is in principle governed by sales law. Because a one-of-a-kind piece is a non-fungible item, certain provisions of the law on contracts for work also apply, including § 649 on cost estimates. This section explains the basics and does not replace legal advice in an individual case.

Under § 649 BGB: if the contract is based on a cost estimate whose accuracy the maker has not guaranteed, and the work can only be carried out with a substantial overrun, the customer may terminate the contract. The maker must notify the customer without delay of a foreseeable overrun. For contracts for work, § 632 additionally provides that a cost estimate is not payable in case of doubt.

For the comparison, this has a practical consequence. A cost range protects both sides best if it records in writing what can change it, such as a different stone or additional design rounds, and how deviations will be communicated. Whether a design is charged separately before the commission should be expressly agreed, rather than inferred from the circumstances.

How to compare two quotes

  1. Create the same listTransfer stone, accent stones, metal, design, production, and payment terms for both quotes onto the same list.
  2. Ask about gapsRequest missing details in writing, especially laboratory report, treatment, and fineness.
  3. Align the stonesCheck whether both stones are described by the same standards; otherwise request a report of the same kind.
  4. Match the servicesPlace the number of design rounds, the type of visualization, and the dates side by side.
  5. Clarify the latitudeAsk what shifts a cost range and how deviations will be notified.

Only after these steps does comparing the figures make sense. It often turns out that the seemingly less expensive quote includes a different stone, fewer design rounds, or no three-dimensional view. How much creative input a house allows is also part of the service. More on this in the guide creative input.

Common mistakes when comparing

  1. Comparing only the total and overlooking the description of the stone.
  2. Setting a stone with a laboratory report against one without a report.
  3. Reading price on request as a sign of excessive cost.
  4. Considering an early fixed price more binding than a described range.
  5. Taking design rounds and visualization for granted.
  6. Not comparing dates even though a fixed occasion is set.

The path at Vikar Ahmed

Vikar Ahmed carries out custom projects exclusively on request in Idar-Oberstein. The inquiry is first reviewed, and work begins only after acceptance. The initial consultation and research are followed by a 3D CAD design with a photorealistic view, 3D wax printing and investment casting, goldsmithing, setting under the microscope, polishing, and a quality check. As a guide, the house gives about 4 to 6 weeks for more elaborate custom pieces and 1 to 3 months for high jewelry projects. The price depends on the stone, metal and work involved and can only be stated for a specific design.

Frequently asked questions

Price on request or a fixed cost range: how do I compare bespoke quotes fairly?

By bringing both quotes onto the same list: stone with laboratory report and treatment, metal with fineness, design rounds, visualization, production, dates, and payment terms. A price on request is customary as long as the stone is open. A cost range is reliable if it states what can change it.

Why do many houses not state a price in advance for one-of-a-kind pieces?

Because the stone usually determines the value and is not settled before the selection. Two stones of the same species and weight can differ greatly in color, clarity, and treatment. A sound figure is only possible once stone and design have been described.

Do I have to pay for a cost estimate?

For contracts for work, § 632 BGB provides that a cost estimate is not payable in case of doubt. Whether design or consultation before the commission is charged separately should be expressly agreed in writing. That way, there is no dispute over the question later.

What happens if a cost range is substantially exceeded?

If the maker has not guaranteed its accuracy, they must notify the customer without delay of a foreseeable substantial overrun under § 649 BGB. The customer may then terminate the contract. Under § 650 BGB, this provision also applies to newly made one-of-a-kind pieces. In individual cases, legal advice helps.

Which details about the stone belong in a bespoke quote?

Species, weight, dimensions, and cut, plus details on treatment and origin and the laboratory that issued the report. For emeralds, the amount of filling is included. Without these details, one stone cannot be compared with another.

Is a fixed price better than a cost range?

Not in principle. A fixed price is only as reliable as the description behind it. If the stone has not yet been settled, a range with clear reasons for deviations is often more honest. After stone and design have been approved, however, a fixed price is entirely possible.

Private consultation

How stone, design, and framework come together for your project is best clarified step by step in conversation. Vikar Ahmed offers consultations by appointment in the showroom in Idar-Oberstein, and virtually on request. Request an appointment for a private consultation.

Further reading

Sources

  1. BGB § 650: Werklieferungsvertrag, accessed 2026-11-17
  2. BGB § 649: Kostenanschlag, accessed 2026-11-17
  3. BGB § 632: Vergütung, accessed 2026-11-17
  4. CIBJO: The Blue Books, accessed 2026-11-17
  5. GIA: Colored Stone Reports, accessed 2026-11-17
  6. SSEF: Emerald, Füllung im Bericht, accessed 2026-11-17
  7. Vikar Ahmed: Kontakt und Custom Order, accessed 2026-11-16
  8. Vikar Ahmed: Bespoke, accessed 2026-11-16
Hände eines Paares mit Diamantringen und goldener Uhr
Private consultation

A personal conversation starts here.

At the showroom in Idar-Oberstein or by video. Vikar Ahmed discusses your ideas, stones and designs with you and answers your questions calmly and in confidence.

Hauptstraße 111 · 55743 Idar-Oberstein, Germany